Version 1.0.15 built 2020-07-24 with R 4.0.2.

The library provides datasets (internal `.rda`

and in CSV-format in `/extdata/`

) which support users in a black-box performance qualification (PQ) of their software installations.^{1} Users can analyze data imported from CSV- and Excel-files.

The methods given by the European Medicines Agency (EMA) in Annex I^{2} for reference-scaling according to the Guideline on the Investigation of Bioequivalence^{3} are implemented. Potential influence of outliers on the variability of the reference can be assessed by box plots of studentized and standardized residuals as suggested at a joint EGA/EMA symposium.^{4}

`method.A()`

A linear model of log-transformed PK responses and effects

*sequence*, *subject(sequence)*, *period*, *treatment*

where all effects are fixed (*i.e.*, ANOVA). Estimated via function `lm()`

of library `stats`

.

`method.B()`

A linear model of log-transformed PK responses and effects

*sequence*, *subject(sequence)*, *period*, *treatment*

where *subject(sequence)* is a random effect and all others are fixed.

Three options are provided

- Estimated via function
`lmer()`

of library`lmerTest`

.

- Employs Satterthwaite’s approximation
^{5}of the degrees of freedom`method.B(..., option = 1)`

, which is equivalent to SAS’`DDFM=SATTERTHWAITE`

, Phoenix WinNonlin’s`Degrees of Freedom Satterthwaite`

, and Stata’s`dfm=Satterthwaite`

. - Note that this is the only available approximation in SPSS.

- Estimated via function
`lme()`

of library`nlme`

.

- Employs degrees of freedom equivalent to SAS’
`DDFM=CONTAIN`

(implicitly preferred by the EMA), Phoenix WinNonlin’s`Degrees of Freedom Residual`

, STATISTICA’s`GLM containment`

, and Stata’s`dfm=anova`

. - To comply with the EMA’s Q&A document,
`method.B(..., option = 2)`

is the default (*i.e.*, if the argument`option`

is missing).

- Estimated via function
`lmer()`

of library`lmerTest`

.

- Employs the Kenward-Roger approximation
^{6}of the degrees of freedom`method.B(..., option = 3)`

, which is equivalent to Stata’s`dfm=Kenward Roger (EIM)`

and SAS’`DDFM=KENWARDROGER(FIRSTORDER)`

,*i.e.*, based on the*expected*information matrix. - Note that SAS with
`DDFM=KENWARDROGER`

and JMP calculate Satterthwaite’s [*sic*] degrees of freedom and apply the Kackar-Harville correction^{7}*i.e.*, based on the*observed*information matrix.

`ABE()`

Average Bioequivalence, where the model is identical to Method A. By default the conventional acceptance range of 80.00 – 125.00% is used. Tighter limits (90.00 – 111.11%) for narrow therapeutic index drugs (EMA) or wider limits (75.00 – 133.33% for C_{max} according to the guidelines of the GCC and South Africa) can be specified by the arguments `theta1`

(lower limit) and/or `theta2`

(upper limit).

The hypotheses are \[\small{H_{0}:\theta_0\notin [L,U]\:vs\:H_{1}:L<\theta_0<U}\] where \(\small{\theta_0=\mu_T/\mu_R}\) and the Null hypothesis is __in__equivalence. In Average Bioequivalence the limits \(\small{[L,U]}\) are fixed, whereas in ABEL they can be expanded based on the variability of the reference treatment.

Details about the reference datasets and their designs:

Both the test and the reference treatments are administered at least once.

`TRTR | RTRT`

`TRRT | RTTR`

`TTRR | RRTT`

`TRTR | RTRT | TRRT | RTTR`

`TRRT | RTTR | TTRR | RRTT`

Although supported, these design are *not recommended* due to confounded effects.

The test treatment is administered at least once to ½ of the subjects and the reference treatment at least once to the respective other ½ of the subjects.

`TRT | RTR`

`TRR | RTT`

The test and reference treatments are administered once to ½ of the subjects (for the estimation of the CI), *i.e.*, the first group of subjects follows a conventional 2×2×2 trial. In the second group the test and reference treatments are administered at least once to ¼ of the subjects, repectively (for the estimation of *CV _{wT}* and

`TR | RT | TT | RR`

Although supported, Balaam’s design^{8} is *not recommended* due to its poor power characteristics.

The test treatment is administered once and the reference treatment at least once.

`TRR | RTR | RRT`

`TRR | RTR`

The latter is the so-called extra-reference design^{9} which is *not recommended* since it is biased in the presence of period effects.

Columns must have the headers `subject`

, `period`

, `sequence`

, `treatment`

, `PK`

, and/or `logPK`

.^{10} Any order of columns is acceptable. Uppercase and mixed case headers will be internally converted to lowercase headers.

Variable | Format |
---|---|

`subject` |
Integer numbers or any combination of alphanumerics (A-Z, a-z, -, _, #, 0-9) |

`period` |
Integer numbers |

`sequence` |
Numbers or literal sequences not listed in the tested designs are not accepted (e.g., ).`ABAB` |

`treatment` |
The Test treatment must be coded and the Reference `T` (both uppercase).`R` |

`PK` |
Real positive numbers of PK responses. |

`logPK` |
Real numbers of already log_{e}-transformed PK responses (optional and rarely needed). |

Relevant data are used for the estimation of *CV _{wR}* (and

If a subject drops out from the study in a higher period, data of repeated administrations will still be used for the estimation of *CV _{w}*, although data of the other treatment might be missing. Examples for the estimation of

`·`

):`RTRT`

| `RTR·`

`TRRT`

| `TRR·`

`RRTT`

| `RRT·`

or `RR··`

`RRT`

| `RR··`

If a subject drops out from the study in a higher period, data with at least one administration of the Test and Reference will be used in the assessment of BE. Examples (missings denoted by `·`

):

`TRTR`

| `TRT·`

or | `TR··`

`RTRT`

| `RTR·`

or | `RT··`

`TRRT`

| `TRR·`

or | `TR··`

`RTTR`

| `RTT·`

or | `RT··`

`TTRR`

| `TTR.`

`TRT`

| `TR·`

`RTR`

| `RT·`

`TRR`

| `TR·`

`RTR`

| `RT·`

`RTT`

| `RT·`

16 subjects enrolled in the study. In sequence `RTRT`

one dropout in the 2^{nd} period and one in the 4^{th} period. In sequence `TRTR`

one dropout in the 3^{rd} period and one in the 4^{th}.

`1 RTR. 5 RTRT 9 TRTR 13 RTRT`

`2 RTRT 6 TR·· 10 TRTR 14 TRT·`

`3 RTRT 7 RTRT 11 RTRT 15 TRTR`

`4 TRTR 8 R··· 12 TRTR 16 TRTR`

We obtain these datasets:

Dataset | Purpose | included | excluded |
---|---|---|---|

#1 | Estimation of CV_{wR} |
13 who received 2 treatments `R` |
6, 8, 14 |

#2 | Assessment of BE | 15 who received ≥1 treatment `T` and ≥1 treatment `R` |
8 |

#3 | Estimation of CV_{wT} |
13 who received 2 treatments `T` |
1, 6, 8 |

Datasets #1 and #2 are required for ABEL and all three for the WHO’s reference-scaling of AUC (see below). For ABE only dataset #2 is required.

The EMA proposed a linear model of log-transformed PK responses of the reference treatment

*sequence*, *subject(sequence)*, *period*

where all effects are fixed. Estimated via function `lm()`

of library `stats`

:

For informational purposes in full replicate designs (required by the WHO for reference-scaling of AUC; see below) the same model is run with `data = data[data$treatment = "T", ]`

.

Special conditions for the sample size in three period full replicate designs:

The question raised asks if it is possible to use a design where subjects are randomised to receive treatments in the order of TRT or RTR.

The CHMP bioequivalence guideline requires that at least 12 patients are needed to provide data for a bioequivalence study to be considered valid, and to estimate all the key parameters. Therefore, if a 3-period replicate design, where treatments are given in the order TRT or RTR, is to be used to justify widening of a confidence interval for C_{max}then it is considered that at least 12 patients would need to provide data from the RTR arm. This implies a study with at least 24 patients in total would be required if equal number of subjects are allocated to the 2 treatment sequences.— Q&A document

^{11}

If less than twelve subjects are eligible in sequence `RTR`

of a `TRT | RTR`

design (and in analogy in sequence `TRR`

of a `TRR | RTT`

design), the user is notified about the ‘uncertain’ estimate of *CV _{wR}*. However, in a sufficiently powered study such a case is extremely unlikely. Let us explore the confidence interval of the

```
# Estimate sample sizes of full replicate designs (theta0 0.90, target
# power 0.80) and CI of the CV with library PowerTOST
CV <- 0.30
n4 <- PowerTOST::sampleN.scABEL(CV = CV, design = "2x2x4", details = FALSE,
print = FALSE)[["Sample size"]] # 4-period
n3 <- PowerTOST::sampleN.scABEL(CV = CV, design = "2x2x3", details = FALSE,
print = FALSE)[["Sample size"]] # 3-period
# 95% CI of CVs in %
round(100*PowerTOST::CVCL(CV = CV, df = 3*n4-4, "2-sided"), 2) # 4-period
# lower CL upper CL
# 26.19 35.15
round(100*PowerTOST::CVCL(CV = CV, df = 2*n3-3, "2-sided"), 2) # 3-period
# lower CL upper CL
# 26.18 35.18
# As above but assume that only 12 subjects remain in each sequence
round(100*PowerTOST::CVCL(CV = CV, df = 3*24-4, "2-sided"), 2) # 4-period
# lower CL upper CL
# 25.55 36.40
round(100*PowerTOST::CVCL(CV = CV, df = 2*24-3, "2-sided"), 2) # 3-period
# lower CL upper CL
# 24.71 38.28
```

It is unclear why the four period replicate is considered by the EMA to give a more ‘reliable’ estimate than the three period replicate.

The EMA’s models assume equal [*sic*] intra-subject variances of Test and Reference (like in 2×2×2 trials) – even if proven false in one of the full replicate designs (were *both* *CV _{wT}* and

The nested structure *subject(sequence)* of the methods leads to an over-specified model.^{12} The simple model

*sequence*, *subject*, *period*, *treatment*

gives identical estimates of the residual variance and the treatment effect and hence, its confidence interval.

The same holds true for the EMA’s model to estimate *CV _{wR}*. The simple model

gives an identical estimate of the residual variance.

Reference-scaling is acceptable for C_{max} (immediate release products: BE-Guideline) and C_{max}, C_{max,ss}, C_{τ,ss}, _{partial}AUC (modified release products^{13}). The intention to widen the limits has to be stated in the protocol and – contrary to the FDAs RSABE – a clinical justification provided.

Those HVDP for which a wider difference in C_{max}is considered clinically irrelevant based on a sound clinical justification can be assessed with a widened acceptance range. The request for widened interval must be prospectively specified in the protocol.— BE Guideline

The limits can be expanded based on *CV _{wR}*.

*CV*≤ 30%_{wR}

Lower cap,*i.e.*, no scaling, conventional limits:

\(\small{\left[{L,U}\right] = {80.00 - 125.00\%}}\)- 30% <
*CV*≤ 50%_{wR}

Expanded limits based on \(s_{wR}\):

\(\small{\left[{L,U}\right] = 100\,{\text{e}^{\mp 0.760 \cdot {s_{wR}}}}}\) *CV*> 50%_{wR}

Upper cap,*i.e.*, applying \(\small{s^*_{wR}=\sqrt{\text{log}(0.50^2+1)}}\) in the expansion formula or

\(\small{\left[ {L,U} \right] = {69.84 - 143.19\%}}\).

In reference-scaling a so-called *mixed* (a.k.a. *aggregate*) criterion is applied. In order to pass BE,

- the 90% confidence interval has to lie entirely within the acceptance range \(\small{\left[ {L,U} \right]}\)
*and* - the point estimate has to lie within 80.00 – 125.00%.

To avoid discontinuities due to double rounding, expanded limits are calculated in full numeric precision and only the confidence interval is rounded according to the guideline.

```
# Calculate limits with library PowerTOST
CV <- c(30, 40, 49.6, 50, 50.4)
df <- data.frame(CV = CV, L = NA, U = NA, cap = "",
stringsAsFactors = FALSE)
for (i in seq_along(CV)) {
df[i, 2:3] <- sprintf("%.8f", PowerTOST::scABEL(CV[i]/100)*100)
}
df$cap[df$CV <= 30] <- "lower"
df$cap[df$CV >= 50] <- "upper"
names(df)[1:3] <- c("CV(%)", "L(%)", "U(%)")
print(df, row.names = FALSE)
# CV(%) L(%) U(%) cap
# 30.0 80.00000000 125.00000000 lower
# 40.0 74.61770240 134.01645559
# 49.6 70.01700049 142.82245641
# 50.0 69.83678198 143.19101936 upper
# 50.4 69.83678198 143.19101936 upper
```

The SAS code provided by the EMA in the Q&A document does not specify how the degrees of freedom should be calculated in Method B. Hence, the default in `PROC MIXED`

, namely `DDFM=CONTAIN`

is applied, *i.e.*, `method.B(..., option = 2`

). For incomplete data (missing periods) Satterthwaite’s approximation of the degrees of freedom, *i.e.*, `method.B(..., option = 1)`

or Kenward-Roger `method.B(..., option = 3)`

might be a better choice – if stated as such in the SAP.

For background about approximations in different software packages see the electronic Supplementary Material of Schütz *et al.*

The EMA seemingly prefers Method A:

A simple linear mixed model, which assumes identical within-subject variability (Method B), may be acceptable as long as results obtained with the two methods do not lead to different regulatory decisions. However, in borderline cases […] additional analysis using Method A might be required.— Q&A document (January 2011 and later revisions)

The half-width of the confidence interval in log-scale allows a comparison of methods (B *v.s.* A) where a higher value *might* point towards a more conservative decision.^{14} In the provided example datasets – with one exception – the conclusion of BE (based on the mixed criterion) agrees between Method A and Method B.

However, for the highly incomplete dataset 14 Method A was *liberal* (passing by ANOVA but failing by the random effects model):

```
# Compare Method B acc. to the GL with Method A for all reference datasets.
ds <- substr(grep("rds", unname(unlist(data(package = "replicateBE"))),
value = TRUE), start = 1, stop = 5)
for (i in seq_along(ds)) {
A <- method.A(print = FALSE, details = TRUE, data = eval(parse(text = ds[i])))$BE
B <- method.B(print = FALSE, details = TRUE, data = eval(parse(text = ds[i])))$BE
r <- paste0("A ", A, ", B ", B, " \u2013 ")
cat(paste0(ds[i], ":"), r)
if (A == B) {
cat("Methods agree.\n")
} else {
if (A == "fail" & B == "pass") {
cat("Method A is conservative.\n")
} else {
cat("Method B is conservative.\n")
}
}
}
# rds01: A pass, B pass – Methods agree.
# rds02: A pass, B pass – Methods agree.
# rds03: A pass, B pass – Methods agree.
# rds04: A fail, B fail – Methods agree.
# rds05: A pass, B pass – Methods agree.
# rds06: A pass, B pass – Methods agree.
# rds07: A pass, B pass – Methods agree.
# rds08: A pass, B pass – Methods agree.
# rds09: A pass, B pass – Methods agree.
# rds10: A pass, B pass – Methods agree.
# rds11: A pass, B pass – Methods agree.
# rds12: A fail, B fail – Methods agree.
# rds13: A fail, B fail – Methods agree.
# rds14: A pass, B fail – Method B is conservative.
# rds15: A fail, B fail – Methods agree.
# rds16: A fail, B fail – Methods agree.
# rds17: A fail, B fail – Methods agree.
# rds18: A fail, B fail – Methods agree.
# rds19: A fail, B fail – Methods agree.
# rds20: A fail, B fail – Methods agree.
# rds21: A fail, B fail – Methods agree.
# rds22: A pass, B pass – Methods agree.
# rds23: A pass, B pass – Methods agree.
# rds24: A pass, B pass – Methods agree.
# rds25: A pass, B pass – Methods agree.
# rds26: A fail, B fail – Methods agree.
# rds27: A pass, B pass – Methods agree.
# rds28: A pass, B pass – Methods agree.
# rds29: A pass, B pass – Methods agree.
# rds30: A fail, B fail – Methods agree.
```

Exploring dataset 14:

```
A <- method.A(print = FALSE, details = TRUE, data = rds14)
B1 <- method.B(print = FALSE, details = TRUE, data = rds14, option = 1)
B2 <- method.B(print = FALSE, details = TRUE, data = rds14) # apply default option
B3 <- method.B(print = FALSE, details = TRUE, data = rds14, option = 3)
# Rounding of CI according to the GL
A[15:19] <- round(A[15:19], 2) # all effects fixed
B1[15:19] <- round(B1[15:19], 2) # Satterthwaite's df
B2[15:19] <- round(B2[15:19], 2) # df acc. to Q&A
B3[15:19] <- round(B3[15:19], 2) # Kenward-Roger df
cs <- c(2, 10, 15:23)
df <- rbind(A[cs], B1[cs], B2[cs], B3[cs])
names(df)[c(1, 3:6, 11)] <- c("Meth.", "L(%)", "U(%)",
"CL.lo(%)", "CL.hi(%)", "hw")
df[, c(2, 11)] <- signif(df[, c(2, 11)], 5)
print(df[order(df$BE, df$hw, decreasing = c(FALSE, TRUE)), ],
row.names = FALSE)
# Meth. DF L(%) U(%) CL.lo(%) CL.hi(%) PE(%) CI GMR BE hw
# B-1 197.44 69.84 143.19 69.21 121.27 91.62 fail pass fail 0.28043
# B-2 192.00 69.84 143.19 69.21 121.28 91.62 fail pass fail 0.28046
# B-3 195.99 69.84 143.19 69.21 121.28 91.62 fail pass fail 0.28052
# A 192.00 69.84 143.19 69.99 123.17 92.85 pass pass pass 0.28261
```

All variants of Method B are more conservative than Method A. Before rounding the confidence interval, `option = 2`

with 192 degrees of freedom would be more conservative (lower CL 69.21029) than `option = 1`

with 197.44 degrees of freedom (lower CL 69.21286). Given the incompleteness of this dataset (four missings in period 2, twelve in period 3, and 19 in period 4), Satterthwaite’s or Kenward-Roger degrees of freedom are probably the better choice.

For detailed comparisons between methods based on simulations see the electronic Supplementary Material of Schütz *et al.*

It is an open issue how outliers should be handled.

The applicant should justify that the calculated intra-subject variability is a reliable estimate and that it is not the result of outliers.— BE-Guideline

Box plots were ‘suggested’ by the author as a mere joke [*sic*] at the EGA/EMA symposium, being aware of their nonparametric nature and the EMA’s reluctance towards robust methods. Alas, this *joke* was included in the Q&A document.

[…] a study could be acceptable if the bioequivalence requirements are met both including the outlier subject (using the scaled average bioequivalence approach and the within-subject CV with this subject) and after exclusion of the outlier (using the within-subject CV without this subject).

An outlier test is not an expectation of the medicines agencies but outliers could be shown by a box plot. This would allow the medicines agencies to compare the data between them.— EGA/EMA Q&A-document

With the additional argument `ola = TRUE`

in `method.A()`

and `method.B()`

an outlier analysis is performed, where the default `fence = 2`

.^{15}

Results differ slightly depending on software’s algorithms to calculate the median and quartiles. Example with the ‘types’ implemented in R (note the differences even in the medians):

```
### Compare different types with some random data
x <- rnorm(48)
p <- c(25, 50, 75)/100
q <- matrix(data = "", nrow = 9, ncol = 4,
dimnames = list(paste("type =", 1:9),
c("1st quart.", "median", "3rd quart.",
"software / default")))
for (i in 1:9) {
q[i, 1:3] <- sprintf("%.5f", quantile(x, prob = p, type = i))
}
q[c(2, 4, 6:8), 4] <- c("SAS, Stata", "SciPy", "Phoenix, Minitab, SPSS",
"R, S, MATLAB, Octave, Excel", "Maple")
print(as.data.frame(q))
# 1st quart. median 3rd quart. software / default
# type = 1 -0.86817 -0.40487 0.29546
# type = 2 -0.85617 -0.38854 0.30042 SAS, Stata
# type = 3 -0.86817 -0.40487 0.29546
# type = 4 -0.86817 -0.40487 0.29546 SciPy
# type = 5 -0.85617 -0.38854 0.30042
# type = 6 -0.86217 -0.38854 0.30290 Phoenix, Minitab, SPSS
# type = 7 -0.85017 -0.38854 0.29794 R, S, MATLAB, Octave, Excel
# type = 8 -0.85817 -0.38854 0.30124 Maple
# type = 9 -0.85767 -0.38854 0.30104
```

- Box plots of studentized
^{16}and standarized^{17}model residuals are constructed.^{18} - Potential outliers are flagged based on the argument
`fence`

provided by the user. - With the additional argument
`verbose = TRUE`

detailed information is shown in the console.

Example for the reference dataset 01:

```
Outlier analysis
(externally) studentized residuals
Limits (2×IQR whiskers): -1.717435, 1.877877
Outliers:
subject sequence stud.res
45 RTRT -6.656940
52 RTRT 3.453122
standarized (internally studentized) residuals
Limits (2×IQR whiskers): -1.69433, 1.845333
Outliers:
subject sequence stand.res
45 RTRT -5.246293
52 RTRT 3.214663
```

If based on *studentized* residuals outliers are detected, additionally to the expanded limits based on the complete reference data, tighter limits are calculated based on *CV _{wR}* after exclusion of outliers and BE assessed with the new limits. Note that

Output for the reference dataset 01 (re-ordered for clarity):

```
CVwR : 46.96% (reference-scaling applicable)
swR : 0.44645
Expanded limits : 71.23% ... 140.40% [100exp(±0.760·swR)]
Assessment based on original CVwR 46.96%
────────────────────────────────────────
Confidence interval: 107.11% ... 124.89% pass
Point estimate : 115.66% pass
Mixed (CI & PE) : pass
╟────────┼─────────────────────┼───────■────────◊─────────■───────────────╢
Outlier fence : 2×IQR of studentized residuals.
Recalculation due to presence of 2 outliers (subj. 45|52)
─────────────────────────────────────────────────────────
CVwR (outl. excl.) : 32.16% (reference-scaling applicable)
swR (recalculated) : 0.31374
Expanded limits : 78.79% ... 126.93% [100exp(±0.760·swR)]
Assessment based on recalculated CVwR 32.16%
────────────────────────────────────────────
Confidence interval: pass
Point estimate : pass
Mixed (CI & PE) : pass
╟┼─────────────────────┼───────■────────◊─────────■─╢
```

Note that the PE and its CI are not affected since the entire data are used and therefore, these values not reported in the second analysis (only the conclusion of the assessment).

The ‘line plot’ is given for informational purposes since its resolution is only ~0.5%. The filled squares `■`

are the lower and upper 90% confidence limits, the rhombus `◊`

the point estimate, the vertical lines `│`

at 100% and the PE restriction (80.00 – 125.00%), and the double vertical lines `║`

the expanded limits. The PE and CI take presedence over other symbols. In this case the upper limit of the PE restriction is not visible.

Since both analyses arrive at the same conclusion, the study should be acceptable according to the Q&A document.

The EMA’s approach of reference-scaling for highly variable drugs / drug products is currently recommended in other jurisdictions as well (*e.g.*, the WHO; the ASEAN, Australia, Brazil, the East African Community, Egypt, the EEU, New Zealand, and the Russian Federation). Health Canada accepts ABEL only for *AUC* with an upper cap of scaling at ~57.4% (maximum expansion to 66.7 – 150.0%) and *might* require a true mixed-effects model. Whether Method B is acceptable is unclear.

If degrees of freedom are approximated (Satterthwaite, Kenward-Roger), the SAP and statistical report should always specify which method will be / was used (see above) in order to allow recalculation in other software. This package uses the *expected* information matrix.^{19}

The estimated *CV _{wR}* is always uncertain (the degree of uncertainty depends on the

Use the optional argument

`method.A(..., adjust = TRUE)`

to iteratively adjust If you want to apply the most conservative approach of Molins

` x <- method.A(..., details = TRUE, print = FALSE)`

.Adjust

`method.A()`

again:` design <- "2x2x4" # your design`

` n <- as.integer(strsplit(x[[6]], "|", fixed = TRUE)[[1]]) # subjects / sequence`

` y <- PowerTOST::scABEL.ad(CV = 0.3, n = n, design = design, print = FALSE)`

` method.A(..., alpha = y$alpha.adj)`

The WHO accepts reference-scaling for AUC (four period full replicate studies are mandatory in order to assess the variability associated with each product). It is not evident how this assessment should be done.

In Population Bioequivalence (PBE) and Individual Bioequivalence (IBE) the *s _{wT}*/

Results of all reference datasets agree with ones obtained in SAS (9.4), Phoenix WinNonlin (6.4–8.1), STATISTICA (13), SPSS (22.0), Stata (15.0), and JMP (10.0.2).

- Helmut Schütz (Author)
- Michael Tomashevskiy (Contributor)
- Detlew Labes (Contributor)

Program offered for Use without any Guarantees and Absolutely No Warranty. No Liability is accepted for any Loss and Risk to Public Health Resulting from Use of this R-Code.

Inspect this information for reproducibility. Of particular importance are the versions of R and the packages used to create this workflow. It is considered good practice to record this information with every analysis.

```
options(width = 80)
devtools::session_info()
# - Session info ---------------------------------------------------------------
# setting value
# version R version 4.0.2 (2020-06-22)
# os Windows 7 x64 SP 1
# system x86_64, mingw32
# ui RTerm
# language EN
# collate C
# ctype German_Germany.1252
# tz Europe/Vienna
# date 2020-07-24
#
# - Packages -------------------------------------------------------------------
# package * version date lib source
# assertthat 0.2.1 2019-03-21 [2] CRAN (R 4.0.0)
# backports 1.1.7 2020-05-13 [2] CRAN (R 4.0.0)
# boot 1.3-25 2020-04-26 [2] CRAN (R 4.0.2)
# callr 3.4.3 2020-03-28 [2] CRAN (R 4.0.0)
# cellranger 1.1.0 2016-07-27 [2] CRAN (R 4.0.0)
# cli 2.0.2 2020-02-28 [2] CRAN (R 4.0.0)
# colorspace 1.4-1 2019-03-18 [2] CRAN (R 4.0.0)
# crayon 1.3.4 2017-09-16 [2] CRAN (R 4.0.0)
# cubature 2.0.4 2019-12-04 [2] CRAN (R 4.0.0)
# desc 1.2.0 2018-05-01 [2] CRAN (R 4.0.0)
# devtools 2.3.1 2020-07-21 [2] CRAN (R 4.0.2)
# digest 0.6.25 2020-02-23 [2] CRAN (R 4.0.0)
# dplyr 1.0.0 2020-05-29 [2] CRAN (R 4.0.0)
# ellipsis 0.3.1 2020-05-15 [2] CRAN (R 4.0.0)
# evaluate 0.14 2019-05-28 [2] CRAN (R 4.0.0)
# fansi 0.4.1 2020-01-08 [2] CRAN (R 4.0.0)
# fs 1.4.1 2020-04-04 [2] CRAN (R 4.0.0)
# generics 0.0.2 2018-11-29 [2] CRAN (R 4.0.0)
# ggplot2 3.3.2 2020-06-19 [2] CRAN (R 4.0.2)
# glue 1.4.1 2020-05-13 [2] CRAN (R 4.0.0)
# gtable 0.3.0 2019-03-25 [2] CRAN (R 4.0.0)
# htmltools 0.5.0 2020-06-16 [2] CRAN (R 4.0.0)
# knitr 1.29 2020-06-23 [2] CRAN (R 4.0.2)
# lattice 0.20-41 2020-04-02 [2] CRAN (R 4.0.0)
# lifecycle 0.2.0 2020-03-06 [2] CRAN (R 4.0.0)
# lme4 1.1-23 2020-04-07 [2] CRAN (R 4.0.0)
# lmerTest 3.1-2 2020-04-08 [2] CRAN (R 4.0.0)
# magrittr 1.5 2014-11-22 [2] CRAN (R 4.0.0)
# MASS 7.3-51.6 2020-04-26 [2] CRAN (R 4.0.0)
# Matrix 1.2-18 2019-11-27 [2] CRAN (R 4.0.0)
# memoise 1.1.0 2017-04-21 [2] CRAN (R 4.0.0)
# minqa 1.2.4 2014-10-09 [2] CRAN (R 4.0.0)
# munsell 0.5.0 2018-06-12 [2] CRAN (R 4.0.0)
# mvtnorm 1.1-1 2020-06-09 [2] CRAN (R 4.0.0)
# nlme 3.1-148 2020-05-24 [2] CRAN (R 4.0.0)
# nloptr 1.2.2.1 2020-03-11 [2] CRAN (R 4.0.0)
# numDeriv 2016.8-1.1 2019-06-06 [2] CRAN (R 4.0.0)
# pbkrtest 0.4-8.6 2020-02-20 [2] CRAN (R 4.0.0)
# pillar 1.4.6 2020-07-10 [2] CRAN (R 4.0.2)
# pkgbuild 1.1.0 2020-07-13 [2] CRAN (R 4.0.2)
# pkgconfig 2.0.3 2019-09-22 [2] CRAN (R 4.0.0)
# pkgload 1.1.0 2020-05-29 [2] CRAN (R 4.0.0)
# PowerTOST 1.4-9 2019-12-19 [2] CRAN (R 4.0.0)
# prettyunits 1.1.1 2020-01-24 [2] CRAN (R 4.0.0)
# processx 3.4.2 2020-02-09 [2] CRAN (R 4.0.0)
# ps 1.3.3 2020-05-08 [2] CRAN (R 4.0.0)
# purrr 0.3.4 2020-04-17 [2] CRAN (R 4.0.0)
# R6 2.4.1 2019-11-12 [2] CRAN (R 4.0.0)
# Rcpp 1.0.4.6 2020-04-09 [2] CRAN (R 4.0.0)
# readxl 1.3.1 2019-03-13 [2] CRAN (R 4.0.0)
# remotes 2.2.0 2020-07-21 [2] CRAN (R 4.0.2)
# replicateBE * 1.0.15 2020-07-24 [1] local
# rlang 0.4.7 2020-07-09 [2] CRAN (R 4.0.2)
# rmarkdown 2.3 2020-06-18 [2] CRAN (R 4.0.0)
# rprojroot 1.3-2 2018-01-03 [2] CRAN (R 4.0.0)
# scales 1.1.1 2020-05-11 [2] CRAN (R 4.0.0)
# sessioninfo 1.1.1 2018-11-05 [2] CRAN (R 4.0.0)
# statmod 1.4.34 2020-02-17 [2] CRAN (R 4.0.0)
# stringi 1.4.6 2020-02-17 [2] CRAN (R 4.0.0)
# stringr 1.4.0 2019-02-10 [2] CRAN (R 4.0.0)
# TeachingDemos 2.12 2020-04-07 [2] CRAN (R 4.0.0)
# testthat 2.3.2 2020-03-02 [2] CRAN (R 4.0.0)
# tibble 3.0.1 2020-04-20 [2] CRAN (R 4.0.0)
# tidyselect 1.1.0 2020-05-11 [2] CRAN (R 4.0.0)
# tufte 0.6 2020-05-08 [2] CRAN (R 4.0.0)
# usethis 1.6.1 2020-04-29 [2] CRAN (R 4.0.0)
# vctrs 0.3.1 2020-06-05 [2] CRAN (R 4.0.0)
# withr 2.2.0 2020-04-20 [2] CRAN (R 4.0.0)
# xfun 0.15 2020-06-21 [2] CRAN (R 4.0.2)
# yaml 2.2.1 2020-02-01 [2] CRAN (R 4.0.0)
#
# [1] E:/Users/HS/Documents/Rtmpgnjiup/Rinst1f304b935b2
# [2] D:/Program Files/R/R-4.0.2/library
```

Schütz H, Tomashevskiy M, Labes D, Shitova A, González-de la Parra M, Fuglsang A.

*Reference Datasets for Studies in a Replicate Design Intended for Average Bioequivalence with Expanding Limits.*AAPS J. 2020; 22:44. doi:10.1208/s12248-020-0427-6.↩︎European Medicines Agency.

*Annex I.*London, 21 September 2016. EMA/582648/2016.↩︎European Medicines Agency, Committee for Medicinal Products for Human Use.

*Guideline on the Investigation of Bioequivalence.*London, 20 January 2010. CPMP/EWP/QWP/1401/98 Rev. 1/Corr **.↩︎European Generic Medicines Association.

*Revised EMA Bioequivalence Guideline.*3^{rd}EGA Symposium on Bioequivalence. London, 1 June 2010. Questions & Answers.↩︎Satterthwaite FE.

*An Approximate Distribution of Estimates of Variance Components.*Biometrics Bulletin. 1946; 2(6): 110–4. doi:10.2307/3002019.↩︎Kenward MG, Roger JH.

*Small Sample Inference for Fixed Effects from Restricted Maximum Likelihood.*Biometrics. 1997; 53(3): 983–97. doi:10.2307/2533558.↩︎Kackar RN, Harville DA.

*Approximations for Standard Errors of Estimators of Fixed and Random Effects in Mixed Linear Models.*J Am Stat Assoc. 1984; 79(388): 853–62. doi:10.1080/01621459.1984.10477102.↩︎Balaam LN.

*A Two-Period Design with t*Biometrics. 1968; 24(1): 61–73. doi:10.2307/2528460.↩︎^{2}Experimental Units.Chow, SC, Shao J, Wang H.

*Individual bioequivalence testing under 2×3 designs.*Stat Med. 2002; 21(5): 629–48. doi:10.1002/sim.1056.↩︎Napierian logarithm (base

*e*). The decadic logarithm (base 10) is not supported).↩︎European Medicines Agency.

*Questions & Answers: positions on specific questions addressed to the Pharmacokinetics Working Party (PKWP).*London, June 2015 (and later revisons). EMA/618604/2008.↩︎Contradics the law of parsimony. Such a nesting is superfluous since in BE trials subjects are uniquely coded. If, say, subject

`1`

is allocated to sequence`TRTR`

there is not yet ‘another’ subject`1`

allocated to sequence`RTRT`

. This explains the many lines in SAS`PROC GML`

given with`.`

and in Phoenix WinNonlin as`not estimable`

.↩︎European Medicines Agency, Committee for Medicinal Products for Human Use.

*Guideline on the pharmacokinetic and clinical evaluation of modified release dosage forms.*London, 20 November 2014. EMA/CHMP/EWP/280/96↩︎Of course, only if point estimates are identical.↩︎

The fences are given by the lowest datum still within

*m*×IQR of the lower quartile, and the highest datum still within*m*×IQR of the upper quartile, where IQR is the interquartile range (difference between the 3^{rd}and 1^{st}quartiles). Data outside fences are considered outliers. Decreasing the multiplier*m*to*e.g.*, 1.5 might result in many outliers, whereas increasing the multiplier in only a few.

Different methods exist to calculate quartiles (nine ‘types’ are available in R, where the default is`type = 7`

). R’s default is used by S, MATLAB, Octave, and Excel. Phoenix WinNonlin, Minitab, and SPSS use`type = 6`

, ScyPy uses`type = 4`

, whereas the default in SAS and Stata is`type = 2`

(though others are available as well).↩︎*Externally*studentized: \(\widehat{\sigma}_{(i)}^2={1 \over n-m-1}\sum_{\begin{smallmatrix}j = 1\\j \ne i\end{smallmatrix}}^n \widehat{\varepsilon\,}_j^{\,2}\)↩︎*Internally*studentized: \(\widehat{\sigma}^2={1 \over n-m}\sum_{j=1}^n \widehat{\varepsilon\,}_j^{\,2}\)↩︎Both are available in SAS and R, whereas only the latter in

*e.g.*, Phoenix WinNonlin. In general the former are slightly more restrictive. Which one will be used has to be stated in the SAP.↩︎For Satterthwaite only available in Phoenix WinNonlin, SPSS, and Stata; as an option in SAS by

`SCORING=1`

. For Kenward-Roger default option`EIM`

in Stata. The*observed*information matrix is the only available in JMP and default`SCORING=0`

in SAS; option`OIM`

in Stata.↩︎Wonnemann M, Frömke C, Koch A.

*Inflation of the Type I Error: Investigations on Regulatory Recommendations for Bioequivalence of Highly Variable Drugs.*Pharm Res. 2015; 32(1): 135–43. doi:10.1007/s11095-014-1450-z.↩︎Muñoz J, Alcaide D, Ocaña J.

*Consumer’s risk in the EMA and FDA regulatory approaches for bioequivalence in highly variable drugs.*Stat Med. 2016; 35(12): 1933–43. doi:10.1002/sim.6834.↩︎Labes D, Schütz H.

*Inflation of Type I Error in the Evaluation of Scaled Average Bioequivalence, and a Method for its Control.*Pharm Res. 2016; 33(11): 2805–14. doi:10.1007/s11095-016-2006-1.↩︎Molins E, Cobo E, Ocaña J.

*Two-Stage Designs Versus European Scaled Average Designs in Bioequivalence Studies for Highly Variable Drugs: Which to Choose?*Stat Med. 2017: 36(30); 4777–88. doi:10.1002/sim.7452.↩︎