Equilibrium in CHNOSZ

Jeffrey M. Dick

This vignette was compiled on 2024-02-11 with CHNOSZ version 2.1.0. This document defines the concepts and provides examples of equilibrium calculations in CHNOSZ.

First, some limitations. CHNOSZ is not a general-purpose speciation code. The types of equilibrium calculations it can handle are restricted to those systems that can be described as balanced on an element. For example, we can predict the speciation of Au in complexes with chloride, hydroxide, and sulfide all with specified activities. But we can not at the same time predict the formation of species such as NaCl(aq), which is required for a complete equilibrium model.

Concepts

System

Chemical system defined by formed species (referred to simply as species) and basis species, which are analogous to thermodynamic components. The possible species are any that are available in the OBIGT thermodynamic database.

Species
Selection of possible chemical species for which you want to calculate relative stabilities.
Basis species
Any minimal set of possible species that can be used to balance the formation reactions of the species. Additionally, in CHNOSZ the number of basis species must be equal to the number of elements.
Formation reaction
Chemical reaction giving the stoichiometry of basis species combined to make 1 mole of a species.
Transformation reaction
Any combination of two formation reactions in opposite directions (1 mole of a species reacts to form 1 mole of another species).
Balancing coefficients
(nbalance) For a system that is balanced on one of the basis species, the number of moles of that basis species in the formation reaction of each of the species. The number can be positive or negative but not zero. Can also represent a virtual quantity, such as 1 (balance on moles of species) or number of amino acids in a protein sequence (balance on protein length).
Speciation diagram
Diagram showing the equilibrium activities of species as a function of one variable.
Predominance diagram
Diagram variables showing fields for species with highest equilibrium activity as a function of two variables. Also known as an equal activity diagram for aqueous species or stability diagram for minerals.
Chemical affinity
Negative of the differential of Gibbs energy of a system with respect to reaction progress. For a given reaction, chemical affinity is the negative of Gibbs energy of reaction: A = 2.303RTlog(K/Q), where K is the equilibrium constant and Q is the activity quotient of species in the reaction (log here denotes base-10 logarithms, i.e. log10 in R).
Maximum affinity method
Approach used to construct predominance diagrams not by finding the highest activity at equilibrium but by finding the highest affinity at a reference activity. The reference activities are user-defined equal activities of species (e.g. unit activity for minerals and 10-3 for aqueous species).
Equilibration method

Calculations of the activities of species in equilibrium.

Metastable equilibrium
The condition that the affinities of all transformation reactions are zero. Implemented with the equilibrate() function in CHNOSZ, which is used below.
Total equilibrium
The condition that the affinities of all formation reactions are zero. Implemented with the solubility() function in CHNOSZ, which is not described here.

Example 1: Amino acids

In this sytem the basis species are CO2, H2O, NH3, H2S, and O2 and the formed species are 20 amino acids.

library(CHNOSZ)
reset()
basis("CHNOS")
species(aminoacids(""))

These functions are used for the different diagrams in the figure.

aaA <- function() {
  a <- affinity(O2 = c(-90, -70), H2O = c(-20, 10))
  diagram(a, balance = 1, names = aa)
}

aaB <- function() {
  a <- affinity(O2 = c(-90, -70), H2O = c(-20, 10))
  e <- equilibrate(a, balance = 1)
  diagram(e, names = aa)
}

aaC <- function() {
  a <- affinity(O2 = c(-71, -66), H2O = c(-8, 4))
  diagram(a, balance = "CO2", names = aa)
}

aaD <- function() {
  a <- affinity(O2 = c(-71, -66), H2O = c(-8, 4))
  e <- equilibrate(a, balance = "CO2")
  diagram(e, names = aa)
}

aaE <- function() {
  basis("O2", -66)
  a <- affinity(H2O = c(-8, 4))
  e <- equilibrate(a, balance = "CO2")
  diagram(e, ylim = c(-5, -1), names = aa)
}

aaF <- function() {
  species(1:20, -7)
  a <- affinity(H2O = c(-8, 4))
  e <- equilibrate(a, balance = "CO2")
  diagram(e, ylim = c(-8, -4), names = aa)
}

The labels used for the diagrams are the one-letter abbreviations for the amino acids.

aa <- aminoacids()
aa
##  [1] "A" "C" "D" "E" "F" "G" "H" "I" "K" "L" "M" "N" "P" "Q" "R" "S" "T" "V" "W"
## [20] "Y"

Press the button to show all of the code for making the figure.

Diagrams A and B use the maximum affinity method, where the reference activities of species are set to a single value. Diagrams C and D use the equilibration method, where the activities of species change across the diagram and the lines are drawn at equal activity. Other comments on the figure:

Example 2: Proteins

In this sytem the basis species are CO2, H2O, NH3, H2S, O2, and H+ and the formed species are 6 proteins from the set of archaeal and bacterial surface layer proteins considered by Dick (2008).

The inclusion of charge in the basis species (with H+) allows ionization of proteins to be calculated (Dick et al., 2006).

basis("CHNOS+")
organisms <- c("METJA", "HALJP", "METVO", "ACEKI", "GEOSE", "BACLI")
proteins <- c(rep("CSG", 3), rep("SLAP", 3))
species(proteins, organisms)

Here are the lengths of the proteins.

protein.length(species()$name)
## [1]  530  828  553  736 1198  844

These functions are used for the different diagrams in the figure.

prA <- function() {
  a <- affinity(O2 = c(-90, -70), H2O = c(-20, 0))
  diagram(a, balance = "length", names = organisms)
}

prB <- function() {
  a <- affinity(O2 = c(-90, -70))
  e <- equilibrate(a, balance = "length")
  ylab <- quote(log~italic(a)~protein)
  diagram(e, names = organisms, ylim = c(-5, -1), ylab = ylab)
}

prC <- function() {
  a <- affinity(O2 = c(-90, -70), H2O = c(-20, 0))
  diagram(a, normalize = TRUE, names = organisms)
}

prD <- function() {
  a <- affinity(O2 = c(-90, -70))
  e <- equilibrate(a, normalize = TRUE)
  ylab <- quote(log~italic(a)~protein)
  diagram(e, names = organisms, ylim = c(-5, -1), ylab = ylab)
}

prE <- function() {
  a <- affinity(O2 = c(-90, -70), H2O = c(-20, 0))
  diagram(a, as.residue = TRUE, names = organisms)
}

prF <- function() {
  a <- affinity(O2 = c(-90, -70))
  e <- equilibrate(a, as.residue = TRUE, loga.balance = 0)
  ylab <- quote(log~italic(a)~residue)
  diagram(e, names = organisms, ylim = c(-3, 1), ylab = ylab)
}

Diagrams A, C, and E are predominance (equal-activity) diagrams made with different balancing constraints. Diagrams B, D, and F show a cross-section of the same system at logaH2O = 0.

Example 3: Normalization

Here is another figure showing the effects of normalization. This is like Figure 5 of Dick (2008), extended to more extreme conditions. If you wish to reproduce the diagram from the 2008 paper more closely, uncomment the add.OBIGT() command.

organisms <- c("METSC", "METJA", "METFE",  "METVO", "METBU",
               "HALJP", "ACEKI", "GEOSE", "BACLI", "AERSA")
proteins <- c(rep("CSG", 6), rep("SLAP", 4))
# Use red for Methano* genera
col <- c(rep(2, 5), rep(1, 5))
basis("CHNOS+")
species(proteins, organisms)
a <- affinity(O2 = c(-100, -65))
layout(matrix(1:2), heights = c(1, 2))
e <- equilibrate(a)
diagram(e, ylim = c(-2.8, -1.6), names = organisms, col = col)
water.lines(e, col = 4)
title(main="Equilibrium activities of proteins, normalize = FALSE")
e <- equilibrate(a, normalize = TRUE)
diagram(e, ylim = c(-4, -2), names = organisms, col = col)
water.lines(e, col = 4)
title(main = "Equilibrium activities of proteins, normalize = TRUE")

Although it is below the stability limit of H2O (vertical dashed line), there is an interesting convergence of the metastable equilibrium activities of some proteins at low log fO2.

Document history

References

Dick JM. 2008. Calculation of the relative metastabilities of proteins using the CHNOSZ software package. Geochemical Transactions 9: 10. doi: 10.1186/1467-4866-9-10

Dick JM, LaRowe DE, Helgeson HC. 2006. Temperature, pressure, and electrochemical constraints on protein speciation: Group additivity calculation of the standard molal thermodynamic properties of ionized unfolded proteins. Biogeosciences 3(3): 311–336. doi: 10.5194/bg-3-311-2006