# Spatial Fuzzy CMean with R

## Introduction

This document is a short introduction to the package geocmeans. It implements a fuzzy classification method bringing spatial information and neighbouring in its calculation

In their article, described the method, originally applied in the analysis of brain imagery. The generalized version of the spatial fuzzy c-means is presented by .

applied the method to socio-residential and environmental data comparing the results with other unsupervised classification algorithms (in French).

There are actually numerous packages and functions to perform unsupervised classification in R (hclust, kmeans, cmeans, factoextra, etc.). However, these methods are not always well-suited to analyze spatial data. Indeed, they do not account for spatial information such as proximity or contiguity between observations. This may lead to solutions for which close observations end up in different groups event though they are very similar.

To our knowledge, the package ClustGeo is the only package proposing an unsupervised classification method which directly consider spatial proximity between observations. The proposed approach is appealing because the user can select a parameter (alpha) that controls the weight of the spatial distance matrix (calculated between observations with their locations) versus the semantic distance matrix (calculated between observations with their variables).

However, this method belongs to the category of “hard-clustering” algorithms. Each observation ends up in one cluster/group. The main draw-back here is the difficulty to identify observations that are undecided, at the frontier of two clusters/groups. The soft or fuzzy clustering algorithms provide more information because they calculate the “probability” of each observation to belong to each group.

The algorithms SFCM (spatial fuzzy c-means) and SGFCM (spatial generalized fuzzy c-means) propose to combine the best of both worlds.

The package geocmeans is an implementation in R of these methods (originally developed for analysis of brain imagery). It comes with a set of functions to facilitate the analysis of the final membership matrices :

• calculating many quality indices (coming mainly from the package fclust)
• mapping the results
• giving summary statistics for each cluster/group.

geocmeans comes with a toy dataset LyonIris, combining many demographic and environmental variables aggregated at the scale of the Iris (aggregated units for statistical information) in Lyon (France).

Before starting the analysis, the data must be standardized because most of the calculus is based on Euclidean distance (we plan to also include Manhattan distance in a future release).

#charging packages and data
library(geocmeans)
library(ggplot2)
library(ggpubr)
library(dplyr)
library(viridis)
library(spdep)

data(LyonIris)

#selecting the columns for the analysis
AnalysisFields <-c("Lden","NO2","PM25","VegHautPrt","Pct0_14",
"Pct_65","Pct_Img","TxChom1564","Pct_brevet","NivVieMed")

#rescaling the columns
Data <- LyonIris@data[AnalysisFields]
for (Col in names(Data)){
Data[[Col]] <- scale(Data[[Col]])
}

#preparing some elements for further mapping
LyonIris$OID <- as.character(1:nrow(LyonIris)) FortiData <- broom::tidy(LyonIris,region="OID") ## Classical Kmeans To explore the dataset and choose the right number of cluster/groups (k) we propose to start with a classical kmeans. #finding the best k by using the r2 of the classification #trying for k from 2 to 10 R2s <- sapply(2:10,function(k){ Clust <- kmeans(Data,centers=k,iter.max = 150) R2 <- Clust$betweenss / Clust$totss return(R2) }) Df <- data.frame(K=2:10, R2 = R2s) ggplot(Df)+ geom_line(aes(x=K,y=R2s))+ geom_point(aes(x=K,y=R2s),color="red")+ xlab("Number of groups")+ ylab("R2 of classification") By plotting the R-squared of the kmeans classification for each k between 2 and 10, we can see a first elbow at k=3. But this small number of groups leads to a classification explaining only 43% of the original data variance. We decide to keep k=4 to have one more group in the analysis. Let us map the obtained groups. KMeanClust <- kmeans(Data,centers=4,iter.max = 150) LyonIris$Cluster <-paste("cluster",KMeanClust$cluster,sep="_") #mapping the groups DFmapping <- merge(FortiData,LyonIris,by.x="id",by.y="OID") ggplot(data=DFmapping)+ geom_polygon(aes(x=long,y=lat,group=group,fill=Cluster),color=rgb(0,0,0,0))+ coord_fixed(ratio = 1)+ scale_fill_manual(name="Cluster",values = c("cluster_1"="palegreen3", "cluster_2"="firebrick", "cluster_3"="lightyellow2", "cluster_4"="steelblue"))+ theme( axis.title = ggplot2::element_blank(), axis.text = ggplot2::element_blank(), axis.ticks = ggplot2::element_blank() ) We can clearly distinguish 4 strong spatial structures, but with some mixing between the clusters. We could now compare this solution with a classical c-means algorithm. ## Classical c-means and generalized c-means The classical c-means is a simple method to perform fuzzy unsupervised classification. The package geocmeans proposes the function CMeans. We set the fuzziness degree (m) to 1.5. We do not present the algorithm here, but only the two main formulas. The first one is used to update the values of the membership matrix at each iteration $$u_ik$$ $u_{ik} = \frac{(||x_{k} - v{_i}||^{2}) ^{(-1/(m-1))}}{\sum_{j=1}^c(||x_{k} - v{_j}||^2 )^{(-1/(m-1))}}$ And the second one to update the centers of the clusters $v_{i} = \frac{\sum_{k=1}^N u_{ik}^m(x_{k})}{\sum_{k=1}^N u_{ik}^m}$ With : • $$x_k$$ the values of the observation $$k$$ • $$v_i$$ the values of the center of the cluster $$i$$ • $$c$$ the number of clusters • $$m$$ the fuzziness index Cmean <- CMeans(Data,4,1.5,500,standardize = FALSE, seed = 456, tol = 0.00001, verbose = FALSE) We can now use the function calcqualityIndexes which combines many indices from the package fclust to analyze the quality of the classification. We will use these values later for the purpose of comparisons among the different algorithms. calcqualityIndexes(Data, Cmean$Belongings, m = 1.5)
## $Silhouette.index ## [1] 0.362851 ## ##$Partition.entropy
## [1] 0.7320161
##
## $Partition.coeff ## [1] 0.6070524 ## ##$Modified.partition.coeff
## [1] 0.4760699
##
## $XieBeni.index ## [1] 1.352347 ## ##$FukuyamaSugeno.index
## [1] 910.6537
##
## $Explained.inertia ## [1] 0.3018179 Note, geocmeans also proposes a so-called generalized version of the c-means algorithm. It is known to accelerate convergence and yield less fuzzy results by adjusting the membership matrix at each iteration. It requires an extra beta parameter controlling the strength of the modification. The modification only affects the formula updating the membership matrix. $u_{ik} = \frac{(||x_{k} - v{_i}||^{2} - \beta_k) ^{(-1/(m-1))}}{\sum_{j=1}^c(||x_{k} - v{_j}||^2 - \beta_k)^{(-1/(m-1))}}$ with $$\beta_k = min(||x_{k} - v||^2)$$ and $$0 \leq \beta \leq 1$$. To select an appropriate value for this parameter, we will try all the possible values between 0 and 1 with a step of 0.05. beta_values <- selectParameters("GFCM",data = Data, k = 4, m = 1.5, beta = seq(0,1,0.05), spconsist = FALSE, tol = 0.00001, seed = 456) knitr::kable(beta_values[c("beta","Silhouette.index","XieBeni.index","Explained.inertia")], col.names = c("beta", "silhouette index", "Xie and Beni index", "explained inertia"),digits = 3) beta silhouette index Xie and Beni index explained inertia 0.00 0.363 1.352 0.302 0.05 0.365 1.268 0.310 0.10 0.366 1.193 0.319 0.15 0.365 1.128 0.327 0.20 0.361 1.071 0.336 0.25 0.360 1.020 0.345 0.30 0.363 0.984 0.354 0.35 0.361 0.963 0.363 0.40 0.370 0.943 0.372 0.45 0.369 0.924 0.381 0.50 0.366 0.907 0.390 0.55 0.365 0.891 0.399 0.60 0.360 0.876 0.409 0.65 0.358 0.863 0.418 0.70 0.358 0.852 0.428 0.75 0.353 0.843 0.437 0.80 0.347 0.838 0.447 0.85 0.340 0.837 0.456 0.90 0.332 0.844 0.464 0.95 0.323 0.861 0.471 1.00 0.317 0.919 0.475 Considering the table above, we select beta = 0.7, it maintains a good silhouette index, and increases Xie and Beni index and explained inertia. Let us compare the results of GFCM and FCM. GCmean <- GCMeans(Data,k = 4,m = 1.5, beta = 0.7,500,standardize = FALSE, seed=456, tol = 0.00001, verbose = FALSE) r1 <- calcqualityIndexes(Data,GCmean$Belongings,m=1.5)
r2 <- calcqualityIndexes(Data,Cmean$Belongings,m=1.5) df <- cbind(unlist(r1), unlist(r2)) knitr::kable(df, digits = 3,col.names = c("GFCM", "FCM")) GFCM FCM Silhouette.index 0.358 0.363 Partition.entropy 0.323 0.732 Partition.coeff 0.833 0.607 Modified.partition.coeff 0.778 0.476 XieBeni.index 0.852 1.352 FukuyamaSugeno.index 219.640 910.654 Explained.inertia 0.428 0.302 The results indicate that the GFCM provides a solution that is less fuzzy (higher explained inertia and lower partition entropy) but keeps a good silhouette index and an even better Xie and Beni index. We can now map the two membership matrices and the most likely group for each observation. To do so, we use the function mapClusters from geocmeans. We propose here to define a threshold of 0.45. If an observation only has values below this probability in a membership matrix, it will be labeled as “undecided” (represented with transparency on the map). We can compare the maps of the classical c-means and the generalized version. cmeansMaps<- mapClusters(LyonIris,Cmean$Belongings,undecided = 0.45)
GcmeansMaps<- mapClusters(LyonIris,GCmean$Belongings,undecided = 0.45) ggarrange(cmeansMaps$ProbaMaps[[1]],GcmeansMaps$ProbaMaps[[1]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(cmeansMaps$ProbaMaps[[2]],GcmeansMaps$ProbaMaps[[2]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(cmeansMaps$ProbaMaps[[3]],GcmeansMaps$ProbaMaps[[3]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(cmeansMaps$ProbaMaps[[4]],GcmeansMaps$ProbaMaps[[4]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(cmeansMaps$ClusterPlot,GcmeansMaps$ClusterPlot, nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") As expected, the results are very similar, but the generalized version provides a more clear-cut classification. ## Spatial c-means and generalized c-means ### Selecting alpha for SFCM Now we can use the SFCM function to perform a spatial c-means. The first step is to define a spatial weight matrix indicating which observations are neighbours and the strength of their relationship. We propose here to use a basic queen neighbour matrix (built with spdep). The matrix must be row-standardized to ensure that the interpretation of all the parameters remains clear. library(spdep) Neighbours <- poly2nb(LyonIris,queen = TRUE) WMat <- nb2listw(Neighbours,style="W",zero.policy = TRUE) The main challenge with the SFCM method is to select the parameter alpha. It represents the weight of the spatial dimension (lagged values) in the calculus of the membership matrix and the cluster centers. • If alpha=0, then we end up with a classical c-means algorithm. • If alpha=1, then the original and the lagged values have the same weight • If alpha=2, then the lagged values are twice more important than the original values • end so on… The two following formulas show how the functions updating the membership matrix and the centers of the clusters are modified. $u_{ik} = \frac{(||x_{k} - v{_i}||^2 + \alpha||\bar{x_{k}} - v{_i}||^2)^{(-1/(m-1))}}{\sum_{j=1}^c(||x_{k} - v{_j}||^2 + \alpha||\bar{x_{k}} - v{_j}||^2)^{(-1/(m-1))}}$ $v_{i} = \frac{\sum_{k=1}^N u_{ik}^m(x_{k} + \alpha\bar{x_{k}})}{(1 + \alpha)\sum_{k=1}^N u_{ik}^m}$ with $$\bar{x}$$ the lagged version of x and $$\alpha \geq 0$$ As the formula suggests, the SFCM can be seen as a spatially smoothed version of the classical c-means and alpha controls the degree of spatial smoothness. This smoothing can be interpreted as an attempt to reduce spatial overfitting of the classical c-means. To select alpha, we propose to check all possible values between 0 and 2 with a step of 0.05. DFindices_SFCM <- selectParameters(algo = "SFCM", data = Data, k = 4, m = 1.5, alpha = seq(0,2,0.05), nblistw = WMat, standardize = FALSE, tol = 0.0001, verbose = FALSE, seed = 456) Now we are able to check the indices to select the best alpha. The goal is to reduce spatial inconsistency as much as possible and to maintain a good classification quality. Let us start with the spatial inconsistency. This indicator (developed for this package) calculates the sum of the squared differences between each observation and its neighbours on the membership matrix. Thus, the maximum for each observation is $$k*j$$ with j the number of neighbours for the observation and k the number of groups. A maximum is reached if each observation has 100% chance belonging to a cluster that is different from all its neighbours. So, when we sum up the values obtained for all the observations, we obtain a quantity of spatial inconsistency. This quantity is divided by the quantity obtained when randomly permuting the rows of the membership matrix. This second quantity represents the spatial inconsistency that we might expect if the observations were randomly scattered in space. We can repeat the permutation step (Monte Carlo approach) and keep the mean of the ratios to have a more robust indicator (see help(spConsistency) for details). A smaller value indicates a smaller spatial inconsistency and thus a greater spatial consistency. 0 meaning that all observations have exactly the same values in the membership matrix as their neighbours (perfect spatial consistency). ggplot(DFindices_SFCM)+ geom_smooth(aes(x=alpha,y=spConsistency), color = "black")+ geom_point(aes(x=alpha,y=spConsistency), color = "red") ## geom_smooth() using method = 'loess' and formula 'y ~ x' Not surprisingly, increasing alpha leads to a decrease of the spatial inconsistency. This gain follows an inverse function. Let us now check the explained inertia ggplot(DFindices_SFCM)+ geom_smooth(aes(x=alpha,y=Explained.inertia), color = "black")+ geom_point(aes(x=alpha,y=Explained.inertia), color = "red") ## geom_smooth() using method = 'loess' and formula 'y ~ x' As expected, the explained inertia decreases when alpha increases and again follows an inverse function. The classification has to find a compromise between the original values and the lagged values. However, the loss is very small here: only 3% between alpha = 0 and alpha = 2. To finish here, we can observe the silhouette and Xie and Beni indicators. ggplot(DFindices_SFCM)+ geom_smooth(aes(x=alpha,y=Silhouette.index), color = "black")+ geom_point(aes(x=alpha,y=Silhouette.index), color = "red") ggplot(DFindices_SFCM)+ geom_smooth(aes(x=alpha,y=XieBeni.index), color = "black")+ geom_point(aes(x=alpha,y=XieBeni.index), color = "red") The detail of the meaning of these indicators is beyond the scope of this vignette. Let us just stress that a larger silhouette index indicates a better classification, and a smaller Xie and beni index indicates a better classification. After considering all the previous charts, we decide to keep alpha = 0.7 as it seems to provide a good balance between spatial consistency and classification quality in this case. SFCM <- SFCMeans(Data, WMat, k = 4, m = 1.5, alpha = 0.7, tol = 0.0001, standardize = FALSE, verbose = FALSE, seed = 456) ### Selecting alpha and beta for SGFCM It is also possible to use the so-called generalized version of the spatial c-means. In that case, we must define both alpha and beta. The next formula shows how the membership matrix is updated at each iteration. Note that the centres of the clusters are updated with the same formula as SFCM. $u_{ik} = \frac{(||x_{k} - v{_i}||^2 -\beta_k + \alpha||\bar{x_{k}} - v{_i}||^2)^{(-1/(m-1))}}{\sum_{j=1}^c(||x_{k} - v{_j}||^2 -\beta_k + \alpha||\bar{x_{k}} - v{_j}||^2)^{(-1/(m-1))}}$ Because we select a high resolution for our grid search of alpha and beta, we will use a multiprocessing approach. future::plan(future::multiprocess(workers=4)) DFindices_SFGCM <- selectParameters.mc(algo = "SGFCM", data = Data, k = 4, m = 1.5, alpha = seq(0,2,0.05), beta = seq(0,0.85,0.05), nblistw = WMat, standardize = FALSE, chunk_size = 50, tol = 0.0001, verbose = FALSE, seed = 456) ggplot(DFindices_SFGCM) + geom_raster(aes(x = alpha, y = beta, fill = Silhouette.index), size = 5) + scale_fill_viridis() + coord_fixed(ratio=1) ggplot(DFindices_SFGCM) + geom_raster(aes(x = alpha, y = beta, fill = XieBeni.index), size = 5) + scale_fill_viridis() + coord_fixed(ratio=1) ggplot(DFindices_SFGCM) + geom_raster(aes(x = alpha, y = beta, fill = spConsistency), size = 5) + scale_fill_viridis() + coord_fixed(ratio=1) The first two plots indicate that some pairs of alpha and beta in particulat yield good results in the range 0.8 < alpha < 1.2 and 0.6 < beta < 0.8. The last plot shows that the selection of beta has no impact on the spatial consistency. Considering the previous plots, we decide to retain the solution with beta = 0.65 and alpha = 0.95 which yield very good results for all the indices considered. SGFCM <- SGFCMeans(Data,WMat,k = 4,m=1.5, alpha=0.95, beta = 0.65, tol=0.0001, standardize = FALSE, verbose = FALSE, seed = 456) Again, we compare here the generalized and the classical version of the spatial c-means algorithm. r1 <- calcqualityIndexes(Data, SFCM$Belongings,m = 1.5)
r2 <- calcqualityIndexes(Data, SGFCM$Belongings,m = 1.5) diagSFCM <- spatialDiag(belongmatrix = SFCM$Belongings, nblistw = WMat,
undecided = 0.45,nrep = 500)
diagSGFCM <- spatialDiag(belongmatrix = SGFCM$Belongings, nblistw = WMat, undecided = 0.45,nrep = 500) df <- cbind( c(unlist(r1),diagSFCM$SpConsist),
c(unlist(r2),diagSGFCM$SpConsist) ) row.names(df)[length(row.names(df))] <- "sp.consistency" knitr::kable(df,digits = 3,col.names = c("SFCM","SGFCM")) SFCM SGFCM Silhouette.index 0.370 0.391 Partition.entropy 0.765 0.544 Partition.coeff 0.592 0.715 Modified.partition.coeff 0.456 0.620 XieBeni.index 1.976 0.971 FukuyamaSugeno.index 1100.096 739.201 Explained.inertia 0.274 0.347 sp.consistency 0.183 0.171 The solution of the SGFCM is better on the semantic and the spatial aspects. We can compare the maps SFCMMaps <- mapClusters(geodata = LyonIris,belongmatrix = SFCM$Belongings,undecided = 0.45)
SGFCMMaps <- mapClusters(geodata = LyonIris,belongmatrix = SGFCM$Belongings,undecided = 0.45) ggarrange(SFCMMaps$ProbaMaps[[1]],SGFCMMaps$ProbaMaps[[1]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(SFCMMaps$ProbaMaps[[2]],SGFCMMaps$ProbaMaps[[2]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(SFCMMaps$ProbaMaps[[3]],SGFCMMaps$ProbaMaps[[3]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(SFCMMaps$ProbaMaps[[4]],SGFCMMaps$ProbaMaps[[4]], nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ggarrange(SFCMMaps$ClusterPlot,SGFCMMaps$ClusterPlot, nrow = 1, ncol = 2, common.legend = TRUE, legend = "bottom") ## Comparing the spatial consistency of FCM, GFCM, SFCM and SGFCM Now, we can do a deeper spatial analysis and compare the spatial consistency of the four classifications realized (FCM, GFCM, SFCM, SGFCM). spdiag_1 <- spatialDiag(Cmean$Belongings, nblistw = WMat,nrep=250)
spdiag_2 <- spatialDiag(GCmean$Belongings, nblistw = WMat,nrep=250) spdiag_3 <- spatialDiag(SFCM$Belongings, nblistw = WMat,nrep=250)
spdiag_4 <- spatialDiag(SGFCM$Belongings, nblistw = WMat,nrep=250) #looking at the moran I values for each group moran_table <- data.frame(cbind(spdiag_1$MoranValues$MoranI, spdiag_2$MoranValues$MoranI, spdiag_3$MoranValues$MoranI, spdiag_4$MoranValues$MoranI )) row.names(moran_table) <- paste("cluster ",1:4,sep="") knitr::kable(moran_table, digits = 3, col.names = c("FCM","GFCM","SFCM","SGFCM"), caption = "Moran I index for the columns of the membership matrix" ) Moran I index for the columns of the membership matrix FCM GFCM SFCM SGFCM cluster 1 0.835 0.789 0.908 0.913 cluster 2 0.723 0.624 0.860 0.865 cluster 3 0.389 0.408 0.645 0.703 cluster 4 0.547 0.489 0.749 0.741 Not surprisingly, the Moran I values calculated on the membership matrices are higher for SFCM and SGFCM, indicating stronger spatial structures in the classifications. print(c(spdiag_1$SpConsist, spdiag_2$SpConsist,spdiag_3$SpConsist,spdiag_4$SpConsist)) ## [1] 0.3344399 0.3933804 0.1837933 0.1713737 Considering the values of spatial inconsistency, we could check if the value obtained for SGFCM is significantly lower than the one of SFCM. Considering the previous 250 permutated values, we can calculate a pseudo p-value: sum(spdiag_4$SpConsist > spdiag_3$SpConsistSamples) / length(spdiag_3$SpConsistSamples)
## [1] 0

It appears that out of 250 permutations, the observed values of spatial inconsistency of SGFCM are always lower than that of SFCM. The difference is significant at the threshold 0.004 (=1/250)

We can map the undecided observations of the final solution. These entities should be analyzed more precisely. Selecting them is easy with the function undecidedUnits of the geocmeans package.

Undecided <- undecidedUnits(SGFCM$Belongings,0.45) LyonIris$FinalCluster <- ifelse(Undecided=="Undecided",
"Undecided",paste("cluster",Undecided,sep="_"))

#mapping the groups
DFmapping <- merge(FortiData,LyonIris,by.x="id",by.y="OID")

ggplot(data=DFmapping)+
geom_polygon(aes(x=long,y=lat,group=group,fill=FinalCluster),color=rgb(0,0,0,0))+
coord_fixed(ratio = 1)+
scale_fill_manual(name="FinalCluster",values = c("cluster_V1"="palegreen3",
"cluster_V2"="firebrick",
"cluster_V3"="lightyellow2",
"cluster_V4"="steelblue",
"cluster_V5"="pink",
"Undecided"=rgb(0,0,0,0.4)))+
theme( axis.title = element_blank(),
axis.text = element_blank(),
axis.ticks = element_blank()
)

## Interpreting the results of the final classification

One can obtain a lot of descriptive information about the final groups with three functions of geocmeans :

• summarizeClusters : calculate summary statistics for each group for a given dataset by using the membership matrix as weights (sticking with the fuzzy spirit).
• spiderPlots : display a spider plot allowing to compare quickly the differences between groups.
• violinPlots : display a violin plot for each variable in a given dataset. Observations must be grouped before.
summarizeClusters(LyonIris@data[AnalysisFields],belongmatrix = SGFCM$Belongings, weighted = TRUE, dec = 3) ##$Cluster_1
##      Lden   NO2    PM25   VegHautPrt Pct0_14 Pct_65 Pct_Img TxChom1564
## Q5   50.589 27.985 16.784 6.338      8.32    6.77   6.046   7.785
## Q10  51.585 29.228 17.273 7.78       10.331  8.408  6.902   8.577
## Q25  53.776 30.867 18.333 10.334     12.47   10.736 8.825   11.114
## Q50  56.383 35.037 18.952 13.855     15.023  13.891 11.98   13.119
## Q75  59.117 38.881 19.582 18.091     17.456  17.495 15.248  15.495
## Q90  62.474 41.146 20.004 26.082     19.673  20.509 18.629  18.429
## Q95  64.175 44.365 20.206 31.659     21.192  22.987 20.193  20.58
## Mean 56.627 35.058 18.771 15.294     14.91   14.085 12.449  13.567
## Std  4.37   5.766  1.208  7.716      4.416   5.184  5.642   5.298
##      Pct_brevet NivVieMed
## Q5   7.221      17419.89
## Q10  8.474      18717.44
## Q25  10.738     20126.27
## Q50  13.995     22572.24
## Q75  19.769     24717.11
## Q90  25.535     28046.09
## Q95  30.333     31046.21
## Mean 15.935     22869.05
## Std  8.182      4004.629
##
## $Cluster_2 ## Lden NO2 PM25 VegHautPrt Pct0_14 Pct_65 Pct_Img TxChom1564 ## Q5 44.821 14.772 12.649 12.107 12.776 12.691 3.787 6.723 ## Q10 45.822 15.692 12.92 14.655 14.297 13.379 4.259 6.999 ## Q25 49.654 18.685 13.741 21.742 16.697 16.145 5.738 7.934 ## Q50 52.309 22.074 14.555 28.635 18.605 19.207 7.466 9.603 ## Q75 54.808 25.971 15.695 36.48 20.816 22.612 10.08 12 ## Q90 58.116 29 16.534 42.041 22.335 27.455 14.174 15.045 ## Q95 60.163 32.396 17.279 44.911 22.837 29.579 17.32 17.7 ## Mean 52.16 22.436 14.748 28.341 18.402 19.835 8.51 10.619 ## Std 4.802 5.595 1.514 10.238 3.598 5.877 4.842 5.629 ## Pct_brevet NivVieMed ## Q5 10.061 19832.54 ## Q10 11.654 20783.62 ## Q25 14.719 22402 ## Q50 18.432 24529.81 ## Q75 23.231 28399.48 ## Q90 29.32 31031.92 ## Q95 32.451 34184.69 ## Mean 19.709 25380.5 ## Std 8.288 4369.744 ## ##$Cluster_3
##      Lden   NO2    PM25   VegHautPrt Pct0_14 Pct_65 Pct_Img TxChom1564
## Q5   49.798 17.78  13.828 6.066      12.75   9.204  5.735   7.014
## Q10  51.342 19.266 14.049 7.239      14.851  11.218 7.021   8.042
## Q25  53.119 21.734 15.145 10.739     17.284  13.915 9.308   10.341
## Q50  55.599 25.39  15.653 14.948     19.483  17.316 12.747  13.1
## Q75  58.777 30.382 17.072 20.608     21.744  20.907 18.397  16.651
## Q90  62.58  35.164 18.582 29.932     24.515  23.814 22.821  20.836
## Q95  63.937 38.523 18.883 34.84      26.302  25.504 28.424  24.37
## Mean 56.114 26.145 16.019 16.576     19.358  17.264 14.365  14.031
## Std  4.53   6.411  1.614  8.737      4.516   5.483  7.41    7.063
##      Pct_brevet NivVieMed
## Q5   13.488     15635.58
## Q10  17.02      16542.05
## Q25  20.781     18807.47
## Q50  25.835     20432.88
## Q75  32.021     23025.93
## Q90  38.279     25212.17
## Q95  43.764     26277.2
## Mean 27.216     20877.06
## Std  10.51      3534.834
##
## $Cluster_4 ## Lden NO2 PM25 VegHautPrt Pct0_14 Pct_65 Pct_Img TxChom1564 ## Q5 51.576 20.041 14.136 6.455 16.48 7.549 10.481 11.133 ## Q10 52.383 21.383 14.56 7.648 18.483 8.95 16.123 13.787 ## Q25 55.067 23.266 15.907 10.844 21.452 11.048 21.007 17.872 ## Q50 57.243 26.534 16.538 14.218 24.398 13.815 27.056 23.003 ## Q75 59.53 31.85 17.733 18.387 27.6 17.125 32.865 31.83 ## Q90 63.441 37.186 18.757 24.835 30.974 20.535 38.25 34.394 ## Q95 64.732 39.63 19.068 28.607 32.41 23.228 41.005 37.971 ## Mean 57.515 27.99 16.693 15.476 24.403 14.223 26.758 24.189 ## Std 4.253 6.622 1.518 7.25 6.315 5.024 9.457 9.479 ## Pct_brevet NivVieMed ## Q5 21.535 12404.91 ## Q10 26.811 12891.14 ## Q25 32.702 13852.68 ## Q50 38.41 15648.12 ## Q75 45.03 18117.52 ## Q90 49.569 19545.97 ## Q95 53.699 21898.08 ## Mean 38.608 16111.03 ## Std 11.927 3117.687 spiderPlots(LyonIris@data[AnalysisFields], SGFCM$Belongings,
chartcolors = c("darkorange3","grey4","darkgreen","royalblue"))
violinPlots(LyonIris@data[AnalysisFields], SGFCM\$Groups)

That’s all, folks ! Following are the enhancements for the next version

• introduce other methods of spatial c-means
• open some other parameters to the user (such as the function defining the convergence criterion)
• work on documentation
• improve calculus speed by dropping some apply in the code
• adding the manhattan distance (useful when data have a high dimensionality)
Cai, Weiling, Songcan Chen, and Daoqiang Zhang. 2007. “Fast and Robust Fuzzy c-Means Clustering Algorithms Incorporating Local Information for Image Segmentation.” Pattern Recognition 40 (3): 825–38.
Gelb, Jérémy, and Philippe Apparicio. 2021. “Apport de La Classification Floue c-Means Spatiale En géographie: Essai de Taxinomie Socio-résidentielle Et Environnementale à Lyon.” Cybergeo: European Journal of Geography.
Zhao, Feng, Licheng Jiao, and Hanqiang Liu. 2013. “Kernel Generalized Fuzzy c-Means Clustering with Spatial Information for Image Segmentation.” Digital Signal Processing 23 (1): 184–99.